[Brand Overview] Thermalright is a Taiwan brand with more than 20 years of development. It has a certain popularity in the domestic and foreign markets and has a pivotal influence in the player market. We have been focusing on the research and development of computer accessories. R & D product lines include: CPU air-cooled radiator, case fan, thermal silicone pad, thermal silicone grease, CPU fan controller, anti falling off mounting bracket, support mounting bracket and other commodities

4 pin fan splitter cable connects 3 computer case fans to a single motherboard fan header; PWM splitter cable connects an additional fan to increase airflow in your computer case; Fan speed label on the 4 pin fan master connector of the fan header splitter is wired to receive the PWM control signal and share it to the slave fans

DIGITAL A-RGB: The 12 A-RGB LEDs placed along the fan hub and the transparent rotor, with its enclosed design, provide even and rich illumination

Simple Installation - Dielectric oil or 3M Novec immersion provides a cooler environment and more stable system performance. This small device emulates fan presence in systems with no need for fans

Excellent 1 to 5 way splitter pc case fan hub 4-pin PWM fan power supply extension cable cord, better power supply for PC computer case internal motherboard fans.

OPTIMISED FOR STATIC PRESSURE: During the development of the new P12 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure

Proven premium heatsink (more than 300 awards and recommendations from international hardware websites), now available in an all-black design that goes great with many colour schemes and RGB LEDs

EXCELLENT THERMAL CONDUCTIVITY - Upgraded thermal silica gel material with 12 W/mK thermal conductivity, our thermal pad greatly improve the heat transfer between the electronic elements and effectively cool the temperature down in seconds.

Polysynthetic gold thermal compound paste maximizes thermal conductivity between the CPU and heat sink/fan assembly.

Tool-free mounting bracket. For optimized cooling, Corsair recommends the radiator is mounted hose down.

Advanced Lighting Modes: With an infinity mirror design, add amazing color and lighting to your CPU cooler for a fully dynamic lighting experience

Premium quiet fan, 60x60x25 mm, 12V, 3-pin Molex, 3000/2400/1600 RPM, max. 19.3 dB(A), >150,000 h MTTF

alphacool 17141. Width: 36 mm

ONLY FITS 2-3/8" PSU SPACING (See Photos)

Four pieces 6mm nickel plated copper heat pipes for better performance

15% better in performance to noise ratio, FUMA2 has reached itself to next level. Dual heatsinks and fans accelerate and enhance heat dissipation for top-tier performance. 6 x 6mm heatpipes and copper plate base ensure heat from CPU and drop temps. Ideal for mainstream, gaming PC, even overclocking with high TDP processor(9900k, 9700k, 9600k,3700x, 3800x, 3900x, 3950x).

Requires 24 Volt Power Source

The ultimate EVA Project designed by ROG

Processor cooler

📢【EXCELLENT THERMAL CONDUCTIVITY】:Upgraded thermal silica gel material with 12.8 W/mK thermal conductivity, Density (G/cc): 3.1±0.2 Hardness (Sc): 30~55; Breakdowm voltage: 9.8KV; Conductivity: None,our thermal pad greatly improve the heat transfer between the electronic elements and effectively cool the temperature down in seconds.

Apevia 120mm Silent Case Fan w/ 28x RGB Color Changing LED Lights (16 Outer Ring / 12 Inner Ring) & 8x Anti-Vibration Rubber Pads (4 on Each Side)

【Better cooling】 Water block with full copper mirror plane base + 240 specification black aluminum fin cold plate + high polymer woven protective water pipe + standard 120mm ARGB fan to create low resistance, high cooling, low Evaporative, long-life integrated water-cooled cooler.

3830046991799

Customized liquid cooling reservoir solution for Thermaltake Core P8 chassis

Support PWM function.

Dust filter set: dust filter size is 120 x 120 x 0.45 mm; Mesh hole diameter is 1 mm; Fits for standard 120 mm or slightly smaller size fans; PVC material, lightweight

Fan Compatibility: 140mm Fans, Radiator Dimensions: 143 x 36 x 600 mm

✔️WINSINN 40mm fan 12V which micro size and lightweight design, suitable for 3D printer extruder / hotend / nozzle or any DIY cooling and narrow place.